. Since then, I have been enjoying the great Grado sound. The original Grado S-Cush pads
eventually wore out and I bought a pair of Grado L-Cush pads
("holey pads" - donut shaped pads for Grados) as a replacement. After some time, these pads were also worn out (bits of black sponge started to crumble off).So, I got a pair of Sennheiser HD414 yellow ear pads
. These are known to fit the Grado SR60i. The stock pads do fit the Grado SR60i but because they are closed pads (like the original Grado SR60i comfy pads), the sound is not so "open". Hence, I decided to open them up with the so called "reverse quarter mod".
Sennheiser HD414 pads are packed with this label
The reverse quarter mod refers to taking an American quarter and using it as a guide to cut a hole in the HD414 pads. The "reverse" part refers to using this newly cut hole to stretch over the Grado cans. It is "reversed" in the sense that you are using the "ear side" of the pads on the cans and the original hole now sits on your ears. Do take note that you do not turn the pads inside out.
Since I am from Singapore and do not have an American quarter on me, I used a Singaporean 50 cents coin as it is almost the same diameter.
Place the Singaporean 50 cents (or American quarter) on the inside of the HD414 pads and use a sharp knife to cut around it
You will end up with something like this
Here's how it looks like with the center part removed
Take this pad with the new hole facing the Grado SR60i cans...
...and stretch them over the cans. Don't worry, the pads are quite stretchy. Remember, use the 50 cents (quarter) hole to stretch over the cans.
All done. Enjoy your funky yellow coloured Grado!
So far the Grado with HD414 pads are sounding great. The HD414 pads are softer and get less hot than the original Grado pads. They are also lighter and seem to have more air in them (more porous). I hope they last a little longer. They do cost less than the Grado pads. Hope you enjoyed this guide.
Grado Prestige Series Model SR60i and HD414 pads (reverse quarter mod)
Grado Prestige Series Model SR60i and HD414 pads (reverse quarter mod)
13 comments:
Great post dude! I'll try it out the next time my pads wear out.
Where can I find the L cush or bowl pads in Singapore? And what's the price?
Hi Patton, you can find Grado pads at Stereo Singapore. They call them Grado Flat Pads and Grado Bowl Pads. Link and price over here: http://www.stereo.com.sg/store/nav.php?cPath=102_458
Thanks for the link Ben. I actually bought my Grados from Stereo but I didn't know they stocked pads.
Thanks so much! Did this mod on my Grado SR80's and they are much more comfy now.
For those having trouble finding the original Grado earpads, my personal experience is that Stereo Electronics doesn't always have the Grado earpads in stock. I bought my latest pair from Music By Design at the Adelphi (opposite Funan) Unit #02-27. Also bought my Grado SR60 from them 5 years ago.
Glad this post is helpful to you guys. Its relatively easy to do and I figured sharing the pictures would be clearer and help save a ton of explanation. Have fun with your moved Grado!
Great mod. tried and tested.
Sounds great on my Grados sr80
Glad you liked the mod!
Hi, great mod! where did you get the HD414 pads from? Thanks!
The HD414 pads can be found on Amazon over here: http://amzn.to/1qnnVHS
Or locally, you can find them at Stereo: http://www.stereo.com.sg/store/
Thank you for this CLEAR explanation of what the Reverse mod is, I figured out the quarter but the reverse never made sense til now. Will be modding a pair of original PX-100 whites soon. Thanks again!
Hey, look like I'm late to the game, but wanted to thank you for this post. I finally understand what the reverse should look like! I was about to flip them, when I read i shouldn't ;) now I need to see where to get them best in SG nowadays, seems like Stereo doesn't sell them anymore
Post a Comment